Final $8.2m Bugatti Divo hypercar hits the road

Home Performance Final $8.2m Bugatti Divo...


Just under a year after production began, Bugatti has announced that all 40 examples of its $8.2 million Divo hypercar have been produced, with the final car delivered to a customer in Europe. Although the model shares its chassis and powertrain with the Chiron, all-new bodywork and a re-fettled chassis have, according to Bugatti, been designed to make the Divo a sweeter-handling hypercar.

Buyers had almost entirely free rein when it came to customisation, ranging from bespoke paintwork, to entirely new leather, and custom components inside and out – some options took months, even years to develop. The final car (pictured) is finished in ‘EB 110 LM Blue’ with blue tinted carbonfibre elements and gold metallic wheels. Anne Beynat, sales coordinator at Bugatti, said: ‘Customers often have their own ideas, such as family crests, national flags, their own logos or special colour schemes. We then try to implement the ideas in technical terms.

One look at the Divo and it’s obvious that it could only be a modern Bugatti. However, compared to the sleek and sophisticated Chiron, the Divo takes a more menacing approach, with all-new carbonfibre bodywork that’s studded with ornate aerodynamic detailing.

The new aesthetic starts with the ‘Bugatti line’. On the Chiron the iconic C-shaped line contains the cabin within its unbroken sweep. On the Divo, however, Bugatti has raised this line to halfway up the door, giving Bugatti’s designers the ability to integrate more complex groundwork aero skirting around the car.

The aggressive aero is most prominent on the front end, where a wider horseshoe grille dominates. The lower, stealthier nose might also initially look like its missing its headlights, but they now reside in a tiny 35mm shadow gap beneath the new daytime running lights, which stretch their way back up the front wings. At the light’s termination points are new 911 GT3 RS-like louvres.

Moving up and over the cabin, the roof now incorporates a wide but shallow NACA duct, split by a blue-coloured centre seam that recalls the weld seam that defined many historic Bugatti models, such as the Type 57S Atlantic. The carbonfibre that is exposed has been finished with a blue tint in the resin, but owners will be able to specify their own combination of colours.

The rear design takes a similar approach to the Chiron in having a fairly open tail to release the masses of heat being produced by the powertrain. The biggest design difference is the replacement of the Chiron’s distinctive full-width lightbar (milled from a single, giant piece of aluminium, no less) with a new, 3D-printed mesh that the taillights ‘bleed’ into. The effect is not dissimilar to that on the rear of the Aston Martin Vulcan. The Divo’s rear aero is also less subtle than the Chiron’s, as the wing no longer fully retracts into the rear bodywork. As a result, the new stacked wing is 23 per cent wider, contributing to the extra 90kg of downforce produced by the Divo. Overall weight has been reduced by 35kg compared with the Chiron, although at 1995kg you still wouldn’t call the Divo a lightweight.

Under the new carbonfibre skin is the same 7993cc quad-turbocharged W16 engine, connected to a Ricardo-built dual-clutch automatic gearbox powering all four wheels. Peak power is rated at 1103kW at 6700rpm, with 1600Nm available across an astonishingly wide 2000-6000rpm powerband. Bugatti quotes a 0-100km/h time of 2.4 seconds, but the top speed is limited to 380km/h – because the Divo lacks the ‘Top Speed’ mode that can lift the speed limiter by a further 40km/h on the Chiron.

Inside, much of the Chiron’s interior is carried over. The example picture here features an asymmetrical colour palette of light blue and black Alcantara. There’s a wider use of satin-finish carbonfibre, as well as a dark anodisation on the interior’s usually bright aluminium highlights around the steering wheel and dash.

Although many Divos will doubtlessly live their lives squirrelled away in private collections, all 40 vehicles are homologated for road use. Each one set its respective owner back around €5m (approx. AUD$8.2 million).

Prodrive Hunter T1+ revealed for Dakar 2022

Racer will now run on 37in tyres, with upgraded dampers, larger brakes and modified driveshafts. Prodrive has upgraded its Hunter rally raid racer to compete...

Mercedes-Maybach EQS SUV concept will debut at Munich Motor Show

Mercedes will unveil a new Maybach concept at Munich this year, which is expected to morph into flagship version of the upcoming EQS SUV. Mercedes...

Toyota GR 86 modifications previewed with Gazoo Concept

Toyota’s getting ahead of the game by designing its own mods for the new GR 86

Related articles