Caton restomod revealed by Envisage

HomeCar NewsCaton restomod revealed by...


99 healey by caton official images studio front

Envisage engineering will sell 25 bespoke cars under new Caton brand.

Engineering company Envisage Group has launched its first restomod – under a new brand, Caton – based on an early Austin Healey.

The Healey by Caton will be limited to 25 examples and draws on Envisage’s vast experience in the one-off, specialist and classic car fields.

97 healey by caton official images studio rear

As well as creating concept cars for manufacturers and coachbuilding specials for single customers, Envisage is the company that made the body shells and panels for Jaguar’s recent D-Type and XKSS Continuation models.

The Healey, though, is the company’s first vehicle to wear its own branding. Caton is an amalgam of the group’s parent company, Cattrell Hudson.

The base car is the Austin Healey 100/4 BN1, made between 1953 and 1955.

97 healey by caton official images studio rear

Caton sends the engine off to JME Healeys, a model specialist, in Warwick, and turns its attention to the rest of the car for restoration and modification.

“The mechanical platform is now as capable as it can be,” said Envisage CEO Tim Strafford.

The chassis is lightly strengthened and has known weaknesses and corrosion points addressed, but is mostly just restored as is – important because the car needs to retain its original identity.

98 healey by caton official images studio side

The most notable change takes advantage of Envisage’s coachbuilding experience by reworking and subtly altering every body panel or creating new ones.

The finish and shape is one that Caton’s designers and engineers think the Healey’s creators would have liked to give the production car first time around – something now made possible by tighter tolerances and better production and design techniques, plus the fact that the Caton car is such a high-end, low volume product.

Seams that ran along the front and rear wing tops on the original Healey have been eliminated, as have door and boot handles, while the front grille is new, with vanes that appear to sweep under the bonnet, and there’s a new finishing panel on the side vent. Panel gaps are tight and consistent.

94 healey by caton official images studio alloy wheels

“The concept was to clean the car without changing the proportions,” said Darryl Scriven, who oversaw the design. “It takes the car in its purest form and takes away elements that could have been seen as compromises.”

The suspension is subtly revised with new coil springs at the front, retaining the original leaf springs at the rear, but with new anti-roll bars all around.

When the engine returns from JME, the 3.0-litre straight four makes 138kW at 5000rpm and 265Nm of torque and drives through a five-speed manual transmission rather than the original Healey’s three-speeder with overdrive on second and third.

84 healey by caton official images studio engine

The disc brakes are by JME, too, instead of the original’s drum brakes.

Overall weight is around 920kg.

The gearbox has a smaller bellhousing than the original so the change frees up considerable room in the cabin, as does removing a spare wheel from behind the seats. A new set of pedals completes an improvement to the driving position and Caton has redesigned and retrimmed the interior. There’s no heater, stereo, tonneau cover or hood, but the windscreen has been made a touch higher for less blustery cruising.

91 healey by caton official images studio cabin

Caton estimates it has spent 2000 hours working on the Healey prototype but is hoping to reduce that for the next 24 cars.

It’s going to charge £474,000 (AUD$834,000) including the donor car. The Caton Healey will make its public debut at Salon Privé in London on 21-23 April, before heading to Bicester Heritage’s Scramble on Sunday 24 April.

Matt Prior

Related articles