Video: Hennessey Venom F5 at full throttle

HomeCar NewsVideo: Hennessey Venom F5...


Hennessey Venom F5 production

Mega-powered American hypercar shows off high-speed potential and V8 snarl as tests continue.

American company Hennessey has released a new video (below) showing its Venom F5 hypercar being driven at full-throttle in the latest high-speed tests.

The V8 hypercar, which Hennessey hopes will ultimately break the 500km/h production car speed record, was driven in its most potent ‘F5’ mode – which liberates the car’s full 1336kW output – for the purposes of high-speed stability testing. Previously, the 6.6-litre twin-turbo V8’s output was capped at 653kW.

According to company founder and CEO John Hennessey, almost all of the 24 examples of the Venom F5 slated for production have been sold.

The Venom F5 is Hennessey’s first fully bespoke hypercar. First previewed with a styling model in 2018, the carbonfibre-bodied coupé is differentiated from the ultra-low-volume Venom GT of 2011 by utilising an in-house platform instead of a heavily modified Lotus chassis.

Hennessey claims the combination of its colossal engine power and a 1360kg dry weight help make the one of the fastest road-legal cars in the world – possibly even the fastest. The company predicts a 2.6sec 0-100km/h time, a 4.7sec 0-200km/h time and an 8.4sec 0-300km/h time.

Named after the highest rating on the Fujita hurricane strength scale, the F5 Venom uses a carbonfibre monocoque, built by KS Composites in the UK, that weighs just 86kg naked. A rear tubular aluminium subframe contains a 6.6-litre overhead-valve Fury V8 built by Hennessey in Texas with a cast-iron block, aluminium heads, forged connecting rods and pistons and a crank and camshaft made from billet-steel.

Hennessey Venom F5 aerodynamic tests

This is boosted by a pair of ball-bearing turbochargers with 3D-printed compressor housings that can deliver up to 1.58bar of boost.

In addition to the headline power figure, which is delivered at 8000rpm, Hennessey claims a torque peak of 1617Nm, with at least 1356Nm available from 2000rpm through to 8000rpm.

John Hennessey says the use of a pushrod engine was due to the more compact dimensions and lower centre of gravity, as well as his company’s expertise in extracting power from them; Hennessey Performance Engineering already offers a twin-turbo 883kW upgrade for the C8 Chevrolet Corvette.

Hennessey Venom F5 aerodynamic tests 4

Power is delivered to the F5 Venom’s rear wheels by a CIMA seven-speed single-clutch automated transmission and a limited-slip differential.

The obvious differences between the production car and the concept are mostly aerodynamic, with the loss of the raised wing and the use of a substantially larger diffuser. Unusually for this class, there are no active aero elements.

Production director David Davis says the aim has been to create enough downforce for high-speed stability without creating excessive drag. The concept’s targeted 0.33Cd drag coefficient is now a still-respectable 0.39Cd.

Hennessey Venom F5 aerodynamic tests 8

Beyond that, the car looks very similar to the concept, with butterfly doors and decent passenger space for a hypercar, with the well-finished combination of leather facings and carbonfibre trim. There are some other impressive details, including the fact that the entire rear section of the car is made from one piece of carbonfibre with CNC-machined vent holes.

Despite its enormous performance, the F5 Venom has been designed to stay drivable at lesser speeds and to cope with roads and tracks as well as it does v-max runs.

The double-wishbone suspension uses passive dampers, but these can be adjusted for bump and rebound, and the car also offers five selectable driving modes, including Drag for acceleration and F5 for ultimate speed.

Hennessey Venom F5 aerodynamic tests 7

While the first F5 Venom was built in the UK, the others will be assembled in Texas. With production limited to 24 cars, each carries a pre-tax price of $2.1 million (AUD$2.91m).

Mike Duff

" "

Related articles